Search results

Whilst building my first engine from the ground up from my bay, I've been building a spreadsheet of all of the usual suspects (VWH, M7, Cool Air, GSF/VeeWee etc.) prices for the parts I needed; so I could pick the cheapest places for each part and save a little bit of cash. In the process I had...

Clearing out my garage of numerous aircooled VW bits See facebook photo album https://www.facebook.com/Ryan.lepecha/media_set?set=a.774954172626686&type=3 Prefer collection for heavy items, but will post at cost. £1 per item for seal/gaskets, fuel pump rods, dizzy drive £3 4xSpark Plugs...

A few years ago a member of the forum kindly had a few sample teflon front shift rod bushes made up. Only in this last week have I had chance to try one, I am very surprised by the improvement this has made to the shifting on my bus even through I have not long since replaced all the bushes on...

Evening, Just wondering if anyone has had or is having the same issues as I am with the RED9 EZ Rider kit (torsion leaf replacement bars + coilovers). I have got a fair bit of play in the top arms, which would appear to be caused by wear in the Red9 bars. The beam has always been well greased...

Good evening, Just wondering what the best quality rotor arm + cap is for an SVDA/009 distributor. Just had a dizzy rotor crack and begin to fail on me, I've replaced it with an unbranded spare but want to try and avoid a recurrence.. Looks like the Beru ones seem to be well regarded on...

Evening all, Replaced the rear wheel bearings on my bus over the past few days, with good quality German FEBI bearings (came in the parts the PO gave me). I changed them because I thought I had a bit too much axial play on the offside, after all that work its still the same! Measured about...

Evening all.. Has anyone used a Aldon Amethyst Ignition module before? Its supposed to give you the ability to fully program your mechanical advance and also vacuum advance ignition curves.. Significantly cheaper than an MSD, Mallory or 123tune.. Just thinking about getting one to try and...

Do any of you on here go to the Boardmasters surf festival in Newquay? Looking at going to the one next year, not for the music side but the surf etc.. Sent from my Siswoo C55 using Tapatalk

Got a few bits I can take to the EB camp out if anyone wants them. Polished Stainless front grille and a stock front grille, stock one requires clean up and paint. Stainless is brand new(photo on bus shows the one I have on my bus). £10 for stock SOLD £15 for stainless (£45 delivered new) SOLD...

Hope everyone had a good Christmas and New Year. I'm currently organising a 2 week trip to Belgium in my Bay. Plan is to get the ferry from Hull to Zeebrugge on Friday 19th August, and get the ferry back on the Saturday 3rd September. Currently all I know is I'm hoping to camp Thursday to...

Has anyone got a CSP 34ICT linkage kit fitted to their van? I've just fitted mine, and have also fitted one of the EMPI universal throttle cables because my original one was too long when this kit was fitted. But now because of the end piece you screw onto the universal cable I cant get the...

Anyone got a discount code for just kampers? I've been given about 3 or 4 this year at shows etc. But now when I come to put an order together I can't find any of the flyers with them on! Thanks Ryan Sent from my C55 using Tapatalk

So I think its tine put these up for sale cos they have been sat in storage for nearly 12 months. 4x 14" genuine Porsche Fuchs, 5.5J and ET41. Come with 4x 195/70 R14 tyres which are probably less than 20% worn. Rears are XL 95 rated for a VW T2. Fronts are 91 rated I think, so suitable for...

So last week I went to fill up my bus at the local petrol station, the wind blew over one of the advertising signs which therefore fell onto the bus. Said petrol station said they will pay for the repair and have asked me to get a quote from any body shop of my fancy. Does anyone know of...

I am thinking about ordering a 100m roll of 5mm I/D Biofuel hose from Hoseworld.com but obviously I do not require 100m of hose. I was thinking about selling the hose on at shows etc. So its a bit of a who would be interested in buying some, I think about 4m of hose is required for a twin carb...

Hi, Anyone used Dubforce in Leeds for engine tuning or anything else? Thanks

Couple of pictures of things I have knocking around taking up space. Everything is free apart from the cab floor panel which I would like £15 for, I paid more than double that for it.. Carb, fan housing and brake shoes have sold. Located in Leeds.

I've been fitting and sorting out an engine for my bus for the last week. I started it up today and its burning oil, running 65psi oil pressure at cold idle (over 100 psi at 3000 rpm) and pissing oil out of the bell housing. I replaced the flywheel oil seal in the engine with a dual lip version...

http://pages.ebay.com/link/?nav=item.view&id=291315298828&alt=web" onclick="window.open(this.href);return false; Anyone seen this on eBay, it looks like a miss match of loads of panels.. Looks like it was built like that though!

Hi, Been recently looking into replacing the doghouse oil cooler with an adaptor plate to hose in a oil filter and then into a separate oil cooler with fan. My calculations work out that a 13 row x 235mm Mocal cooler would result in efficient oil cooling with something within the similar range...