Search results

Might have one if you still need

My van started to pull to the left an bit under braking occasionally a while back if you pumped the brakes a bit it would cure it for a little while. I rebuilt the rh calliper and changed the flexi hose but it was even worse,so I fitted another calliper and it's still doing it. Could it be...

Need to get this sorted on Saturday any help out there please

Am I right or wrong in thinking that the picture of the starter wiring on my bus already has ahot start relay, if so why does it not turn over when warmed up, thanks

Thanks for the excellent guide and links , did try today but didn't get very far as I've not got the correct size connectors in the shed

As title says front rh brake caliper wanted for a 71 bus please Thanks

I can't open the tech how page so forgive me if the answer is in there. Has anyone got a proper idiots guide to installing the hot start replay on a 71 bay please I have the relay Thanks in advance

Quick q , under the fuse box which is the main beam relay plz

As title says in gwo , usual cable rubs great xc bike, selling due to upgrade and she'd clear out , pics to follow , s Wales area .£400 Ono

Bump , open to sensible offers Provisionally sold to animal

As title says twin webber ict,s from eurocarb, jetted for 1600/1641 twinport, very little use maybe 1000miles, manifolds tapped and fitted with barbs for vac take off all associated parts there to bolt straight on as a direct replacement for single carb, selling as there just sat in the shed...

Who was the ebay seller plz

Thanks all for the replys everyone Jonboylaw , you got it spot on, I must of been blipping the throttle, checked and adjusted valves this morning , tok her round the block for a spin, checked timing full throttle sustained no blipping, 28/30 btdc vac pipes blanked, reconnected pipes same again...

Great answer, , I think that could be it, so set timing at full throttle sustained to 28/ 30 btdc , reconnect vac pipe , can't advance anymore

Cheers for reply Idle with vac disconnected is around 7.5 btdc Dizzy number is Jfud 4, 0231168015, 043905205L In the pic wire is lead is going to 4 , firing order 1432 Sod it , I give up 009 getting fitted in the morning :cry:

Really need clarification on this one Changed the carb , still a solex Disconnected the vac pipe and blanked timed to 28 deg btdc at full advance Reconnected vac pipe idle timing now at 8 ish deg btdc Rev the engine max advance 40 btdc :x Does anyone actually recheck after the vac...

Cheers for the reply, managed to get 1 this afternoon.

Wanted dynamo, bit of a long shot need to pick up today or bh Monday , South Wales area Cheers

As title says dynamo smoking after first start after winter, bushes or windings any thoughts ? Thank you

It's a standard solex 34 pict 3