67panel

A few of us aircooled mechanics looked at this and it appears the latest gaskets have a lot more rubbish in them rather than just cork...

What I’m thinking is that if I can wiggle it about and look in / at the brushes etc and maybe into the regulator then spin him up with...

Well the fuel gauge is wired with an ign feed then the other side goes to tank unit that should have an earth (brown) wire to ground...

I have never had a problem with bolt on covers, use cork gaskets . I also use clear Bostic on the gaskets to glue them to the covers...

Does that mean the s/h unit I have is worth dosh?

I fitted the early brake kit to my late drop spindles, needs an adaptor machining and the original calliper mountings removing. How to...

Just check the voltage (engine off) at the large terminal (battery +) on the alternator just to see if you have continuity. I drove all...

Bugger its the same weekend as the Upton Blues festival, cant miss that as its in staggering distance of my flat (tipsy, who me ?)

If you have met Oz then you know he usually ends up under a seat-----------

Yes thats it just down the inside of chassis rail with grommeted holes at each end. Cant get to take pics at the moment unless there is...

No tube on my 68 (67 build) just grommets as on all the bays I have seen, sounds like someone's add on?

Yup double nut it and I dont mean a Barnsley hand shake! It might be hard to line up on reassemble though.

Yes, just get some help to hold it. At least a 2 person job and 3 is better.

I prefer stone chip,

Just revisiting this ... the play returned as the rest of the year went on, but I didn't use the van that much so lived with it. (Sorry...