Mst pulley

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dci_Carter

Well-known member
Joined
Jul 20, 2015
Messages
130
Reaction score
1
Hi anyone fitted a MST serpentine pulley belt ? I'm trying to crank the engine out of the vehicle using the alternator wheel and its slipping despite the belt being at full tension. Can it be turned this way or does it have to be crank wheel?
18c4315f4ea82eadd67e40231152f7b1.jpg
bc98e5570efa9919eedf035b62f362ea.jpg


Sent from my SM-G975F using Tapatalk

 
I’ve turned mine with the stock pulley set up by just pressing and adding tension to the belt on the longest available side and not too much difficulty and as I’m thinking about it, I’m thinking I actually pull on the fan belt sometimes too but pulling and adding tension at the same time if that makes any sense at all. :mrgreen:

Ozziedog,,,,,,,,,,,and if I can do it :mrgreen: ;) :mrgreen:
 
Lol, that's what I've been doing (pushing) but it's hard going even with the plus or as they are new pistons. All I'm trying to is get tdc on number 1 to ensure the dizzy is in the right place as I think I did it before and the number 1 Mark on the dizzy is showing at 2 o'clock instead of 4

Sent from my SM-G975F using Tapatalk

 

Latest posts

Top