Sourcing Bolts

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mr scoops

Well-known member
Joined
May 8, 2010
Messages
1,144
Reaction score
0
I am now at the point of putting my 0 mile 1641 in the 71 and want to use all new bolts to mount it.
However, looking at the various sites it seems that each bolt is around £4-5 each.
That seems an awful lot for a bolt.

So, can anyone point me in the direction of a website/source that lists the sizes and lengths etc of the 3 bolts that secure the engine and gearbox together (I have the D-Bolt), and also the three bolts used to secure the support bar to the case?
All the suppliers seem to list the bolts as generic use.....
 
Can't help with the sizes for the engine to gearbox bolts but i recently bought three for the rear mounts and got M10 x 65mm Metric 12.9 Grade Self Colour Socket Cap Bolts With Shank, they were 54p each from Spalding. When i was rebuilding Nora i bought bolts from Westfield fasteners or spalding fasteners.
 
Cheers Buddy. The two larger ones holding the engine support bar are M10, the smaller is an M8 isn't it?

Like I've said, I'm just trying to confirm the sizes.
 
Two M10 x70mm and one M8 x55mm bolts are needed for the case to support bar.
I knew the sizes, but just wanted conformation of the length required.
 

Latest posts

Top