Zcat7
Well-known member
- Joined
- Apr 12, 2010
- Messages
- 662
- Reaction score
- 3
- Location
- Oxfordshire
- Year of Your Van(s)
- 1972
- Van Type
- Crossover
Any suggestions on the best place for the towbar wiring to enter the engine bay on a crossover?
Towbar wiring - Crossover
- Thread starter Zcat7
- Start date
Help Support Early Bay Forum:
bertiethebus
Well-known member
Hey buddy, I thought about this with mine and decided to just bring it up through the edge of the battery tray and popped a grommet in. That was the easiest way and meant it was right next to the wiring loom to wire it up
Zcat7
Well-known member
- Joined
- Apr 12, 2010
- Messages
- 662
- Reaction score
- 3
- Location
- Oxfordshire
- Year of Your Van(s)
- 1972
- Van Type
- Crossover
Thanks Bertie. So not having looked at the wiring yet, can you access the nearside lights wiring (indicator/stop/tail) from the battery tray side?
Neil
Neil
bertiethebus
Well-known member
Yeah dead easy 
Zcat7
Well-known member
- Joined
- Apr 12, 2010
- Messages
- 662
- Reaction score
- 3
- Location
- Oxfordshire
- Year of Your Van(s)
- 1972
- Van Type
- Crossover
Awesome Thanks!
Neil
Thanks!Neil
