Gear selection

Early Bay Forum

Help Support Early Bay Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

funkyhippo

Well-known member
Joined
Jan 28, 2012
Messages
110
Reaction score
0
Location
Sunbury on Thames
Struggling to set up gear selection in my 1971 LHD Campmobile.Struggling to shift from 3rd to 2nd. Have replaced all gear linkage & had gearbox rebuilt. Any ideas/ suggestions would be most welcome.
 
Clutch adjusted properly? Clutch arm bent / broken? Gearbox oil fresh and at correct level? Gear lever shuttle bushes all in good nick?
 
Loosen off the the rearmost bolt that fixes the shifter itself to the floor, shift the rear of the shifter plate a few mm to the left and re fasten, it will most likely now be down to shifter adjustment. If you cant you may need to elongate the holes to give you more adjustment.
 

Latest posts

Top