Recent content by orr_niall

No definitely the axle protrusion being too much. Put the hubs from the front on the rear still won’t fit and u can see where the nut of the axle is hitting the inside of the hubs and marking it. Only about 5mm that’s causing the issue stopping them from slipping over the clip. Clips are fine as...

In fact Mike it might be different actually join closer inspection mine appears to have ‘veins’ where the axle protrusion meets the main face yours seems smoother Sent from my iPhone using Tapatalk

Looks the exact same as mine. Do your hubcaps fit or do you need spacers fitted? Sent from my iPhone using Tapatalk

I think they are reproductions but are good quality from what I can tell, with the new clips on they fit very tight on the fronts so hopefully the chances of one coming off is reduced with this. If I had not have changed the clips would have been a different story. From some research I believe I...

I have now hit a new issue. Started a new topic on it as well but thought I would post here also. My wife ordered the hubs for my birthday, great surprise and good excuse to go and fiddle with the van in the evenings now. Got the clips and all done used your tips for the rears and the rivets...

Will certainly look to tighten them again after I run it a few miles don’t want any wheels coming off! Thanks for the tip however easy to overlook Sent from my iPhone using Tapatalk

Hi all, recently posted about an issue when removing the old wide 5 hub clip rivets. Got through that great with the advice given. Now however hit another problem with the new hub caps from eBay which my wife ordered and stated they were to fit the early bay, she got them for my birthday last...

Got it sorted, drilled new 4.5mm holes beside the originals. Has worked fine! Sent from my iPhone using Tapatalk

I have spent the last week renovating my wheels, rust removed primed, painted and clear coated. I drilled out the old clips in prep for fitting new as have new hubs to fit. However, few drill issues when removing the old rivets, used 4.5mm it broke, 5mm didn’t last too long either so I stupidly...

On the brake light issue, my left hand rear light puts the indicator bulb & brake on when I press the brake pedal. Does any one have any advice on why this would be? Sent from my iPhone using Tapatalk

Looking to know the fitment etc of these standard wheels. What alloy wheel size & fitment should I be looking at for replacement? Also may refurbish them, if so what chrome caps should I be looking for? Any links would be great as I start my shopping trip. Sent from my iPhone using Tapatalk

There is free play. Topped up the fluid, was down about half way. Seems to be ok now, not as stiff as was a few weeks ago but no longer foot to the floor either. Checked the wheels after a drive and no heat. Will let the mechanic have a look at the drums in next few weeks also just to be sure...

Do you have a link to the parts I need? I can find the inner scrapers easy enough on JK or eBay but the outer ones don’t appear as easily available. All I can see is them plus the chrome trim? Can you not purchase the outer scraper alone? If you have any links to the parts I need would be great...

Hi, I would be looking to get £100 plus postage. Sent from my iPhone using Tapatalk

Hi all. Looking to upgrade my wheels. From the photo attached they appear to be the standard 14” ones. Previous owner advised he had the caps but they fell off sometime ago. Looking to know the fitment of these if I wanted to upgrade to alloys what size, fitment and offset am I looking at to...