Recent content by 69freedombus

Hi clem, Can you add me to the line up please, 1968 earlybay Thanks, Ben

Looking for a chrome outer sliding door handle and barrel lock please, For a 69 please Ripped off the weekend, Thanks,

Hey dude, I got a spare 5 wire indicator stalk. Any good to you?

Tigerseal Flexible and over paintable

I used a small amount of Acetone on a clean rag, seats came up a treat. Go easy mind, too much acetone you'l melt the seat;)

Hey dude, I searched for a while to find a 9pin hazard relay. When you convert U.S spec to U.K spec, the two wires shown on the wiring diagram (54 and 54f) are not used. No need for the 9pin , 7pin will work fine mate Hope that helps

Looks sweet man!!

Hey dude! When i cleaned up the original paint on my 69 i used the following method. 1- Gave the van a good clean, dried it off 2 - Picked up a machine polisher from machine mart , £40 ish, a kit will come with a variety of mop heads. 3 - using a cloth applied G3 compound to one panel at...

Nice van dude!!

Been getting stuck into the front end, Started off by removing the front beam A friend from the boatyard popped over to cut and weld in some CSP adjusters, Johnny done a top job, now back to bare metal ready for paint. Front end bits cleaned, in primer waiting for topcoat...

the bus came with the heavyweight OG horn, no joy at bench testing. Stripped off the cover plate to find corrosion on all the terminals/ internal parts. Carefully cleaned the brass terminals and connectors using a wire toothbrush, Scotched the ali cover plate, coated that with clear laquer...

Cheers guys! Have a look on ebay buddy, usually a good selection of quirky stickers :D Haha, the rum tap is essential. Ive cut and extra door into the side of the unit to refil the rum. Ive managed to squeeze a shelf in there as im planning on using the rest of the cupboard for extra...

Cheers dude! Getting there now :) Been working on the van 3 years, this week Researched sound/ heat insulation, bought some Thermoliner from a company called Harrisons Trim supplies. Its a closed cell foam so doesnt absorb moisture, super lightweight foiled backed keeps the heat in. Really...

3/4 rnr bed fitted, jigged the spice rack to fit under the bed. Planning on having a slight corner seat which will be fixed, leaving just enough room to open the fridge door,

Been cracking on with the bus, starting to come together. Had help from some awsome friends, Gearbox cleaned up, ready to go back in Swapped the repro sprints for a 1600 engine, running the OG steels/ whitewalls. Stripped top end off the motor for a complete rebuild. Engines being done...